SALE
QuadrAnt™ for WingtraOne Gen I VTOL Drone Range Extender Directional Antenna Set
The QuadrAnt™ by WirEng® is a high gain directional antenna set dedicated to significantly extend your WingtraOne Gen I for significantly increased range, reliability, operational stability, battery life, and invulnerability from external interferences.
The QuadrAnt™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your WingtraOne Gen IL, or simply when your WingtraOne Gen I operating range is not enough to satisfy your purposes.
The QuadrAnt™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the QuadrAnt™ by WirEng® is to significantly increase your WingtraOne Gen I reach, however, the QuadrAnt™ is also recommended to stabilize your WingtraOne Gen I operation because it will provide your WingtraOne Gen I with a very strong and reliable signal at any height, inclination, and operating distance, with possibly a longer battery life as an added benefit, since the drone's transmitter won't have to operate at maximum transmit power when far away.
The QuadrAnt™ by WirEng® is truly compatible with your WingtraOne Gen I, because it supports all of its frequencies and modes of operation, which we carefully verified with the manufacturer's specifications. This QuadrAnt™ set is made for the WingtraOne Gen I, and if you have any questions please contact us here for assistance.
The QuadrAnt™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
- The QuadrAnt™ replaces the small module antenna with four powerful WirEng® antennas with enhanced directivity and gain due to WirEng®'s MixPol™ technology, without the need of any module modification (manufacturer warranty will not be voided).
- Provided cables (if chosen) will connect directly to the WingtraOne Gen I module.
- The QuadrAnt™ fully supports the WingtraOne Gen I Automatic Frequency Hops (AFH) on all bands required by the controlling module.
- The QuadrAnt™ fully supports Frequency Hopping Spread Spectrum (FHSS) modality featured by the WingtraOne Gen I.
- The QuadrAnt™ fully supports the anti-jamming frequency hopping technology offered by the WingtraOne Gen I.
- The QuadrAnt™ will increases the VTOL reach, obtaining longer distances and increased stability and reliability for controlling the WingtraOne Gen I.
- All VTOL module and WingtraOne Gen I drone bands are supported by careful verification with WingtraOne Gen I technical specifications.
- * The QuadrAnt™ will also enhance your WingtraOne Gen I controlled by its module operational reliability and stability.
- The QuadrAnt™ will also likely enhance battery life, since the drone won't have to transmit at maximum power when far away from the controller.
- The QuadrAnt™ includes 100% marine-grade stainless steel arm and reflector, made to withstand mission-critical situation and every possible weather condition.
- Each QuadrAnt™ component is categorized as semi industrial grade (anti-UV ABS, splash-proof, and stainless steel hardware)
- Each QuadrAnt™ element has a 24K gold plated N-Connector on its radome.
- The QuadrAnt™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
- The QuadrAnt™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than many times what's usually needed).
- The QuadrAnt™ is strong and durable, for use even in difficult situations and environments.
- The QuadrAnt™ has an IP67 rating (protected against dust, strong water jets, and water waves).
- The QuadrAnt™ has a UL94 V-0 flammability rating
- The QuadrAnt™ has USA and International trademarks current, and utilities and design patents pending.
Buy with confidence, the QuadrAnt™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty!