SALE
QuadrAnt™ for MJX B3 Pro with B3 Pro Drone Range Extender Directional Antenna Set
The QuadrAnt™ by WirEng® is a high gain directional antenna set dedicated to significantly extend your MJX B3 Pro controlled by the B3 Pro controller, for significantly increased range, reliability, operational stability, battery life, and invulnerability from external interferences.
The QuadrAnt™ by WirEng® can also be used in mission-critical situations where RF interferences may cause losing control of your MJX B3 Pro, or simply when your B3 Pro operating range is not enough to satisfy your purposes.
The QuadrAnt™ by WirEng® is splash proof and can therefore be used on boats and under severe weather conditions such as heavy rain, snow, etc. The primary purpose of the QuadrAnt™ by WirEng® is to significantly increase your B3 Pro reach, however, the QuadrAnt™ is also recommended to stabilize your MJX B3 Pro operation because it will provide your B3 Pro with a very strong and reliable signal at any height, inclination, and operating distance, with possibly a longer battery life as an added benefit, since the drone's transmitter won't have to operate at maximum transmit power when far away.
The QuadrAnt™ by WirEng® is truly compatible with your B3 Pro controller, because it supports all of its frequencies and modes of operation, which we carefully verified with the manufacturer's specifications. This QuadrAnt™ set is made for the MJX B3 Pro and B3 Pro controller, so if your drone-controller combination is different, please search our store for the correct combination, or contact us here for assistance.
The QuadrAnt™ by WirEng® comes with WirEng® extended 2-year warranty. Utility and Design Patents pending.
Main Features
- The QuadrAnt™ replaces the two small B3 Pro antennas with four powerful WirEng® antennas with enhanced directivity and gain due to WirEng®'s MixPol™ technology, without the need of any controller modification (manufacturer warranty will not be voided).
- Provided cables (if chosen) will connect directly to the B3 Pro controller.
- The QuadrAnt™ fully supports the B3 Pro Automatic Frequency Hops (AFH) on all bands required by the B3 Pro and B3 Pro.
- The QuadrAnt™ fully supports Frequency Hopping Spread Spectrum (FHSS) modality featured by the B3 Pro and B3 Pro.
- The QuadrAnt™ fully supports the anti-jamming frequency hopping technology offered by both the B3 Pro and B3 Pro.
- The QuadrAnt™ will increases the B3 Pro reach, obtaining longer distances and increased stability and reliability for controlling the MJX B3 Pro.
- All B3 Pro controller and B3 Pro drone bands are supported by careful verification with MJX technical specifications.
- * The QuadrAnt™ will also enhance your MJX B3 Pro controlled by the B3 Pro controller operational reliability and stability.
- The QuadrAnt™ will also likely enhance battery life, since the drone won't have to transmit at maximum power when far away from the controller.
- The QuadrAnt™ includes 100% marine-grade stainless steel arm and reflector, made to withstand mission-critical situation and every possible weather condition.
- Each QuadrAnt™ component is categorized as semi industrial grade (anti-UV ABS, splash-proof, and stainless steel hardware)
- Each QuadrAnt™ element has a 24K gold plated N-Connector on its radome.
- The QuadrAnt™ has an extended operating temperature of -25° to +85° C, for use in virtually any possible environment and weather condition.
- The QuadrAnt™ has has a high input/output power of up to 250 W continuous, 350 W peak (more than many times what's usually needed).
- The QuadrAnt™ is strong and durable, for use even in difficult situations and environments.
- The QuadrAnt™ has an IP67 rating (protected against dust, strong water jets, and water waves).
- The QuadrAnt™ has a UL94 V-0 flammability rating
- The QuadrAnt™ has USA and International trademarks current, and utilities and design patents pending.
Buy with confidence, the QuadrAnt™ comes with WirEng®'s extended two-year all-encompassing manufacturer warranty!