WideAnt2-Plus-5G™ Ultra-Long Range Antenna For Peplink Pepwave MAX BR1 MK2 Router - Support All 5G/4G/3G Cellular Carrier Band, 2x2 And 4x4 MIMO Set, True MIMO Ultra High-Gain Ultra Wide-Band, ±45° Polarizations, 24K Gold Plated Connector
WideAnt2-Plus-5G™ Ultra-Long Range Antenna For Peplink Pepwave MAX BR1 MK2 Router - Support All 5G/4G/3G Cellular Carrier Band, 2x2 And 4x4 MIMO Set, True MIMO Ultra High-Gain Ultra Wide-Band, ±45° Polarizations, 24K Gold Plated Connectors
The WideAnt2-Plus-5G™ is our latest ultra-long range antenna solution for rural areas, or any areas where the cellular data signal is very faint.
It is designed and made specifically for enhancing signal for MIMO devices like Peplink Pepwave MAX BR1 MK2 Router and drastically increasing it's download and upload data speeds.
This product represents a true technological breakthrough as one of the widest-band and most efficient antennas in the world available today and support virtually all 5G/4G/3G cellular carrier bands worldwide!
The WideAnt2-Plus-5G™ has built-in ultra high-gain capability and support ultra-linear frequency response. It captures and transmits both +45° and -45° waves independently (45° clockwise and 45° counter-clockwise) as required by your Peplink Pepwave MAX BR1 MK2 Router (as per strict MIMO standards).
The product is slightly longer than other WirEng products. This is critical for effectively discriminating the RF (Radio Frequencies) noise floor and the real cellular data signal that your Peplink Pepwave MAX BR1 MK2 Router needs to achieve very fast download and upload data speeds at considerably long distances from cellular towers.
The product is fully enclosed and has all-weather protection against harsh climate conditions, making it ideal for outdoor/pole/mast installations. Assembly required.
Each WideAnt2-Plus-5G™ antenna is reinforced and back-shielded with Industrial-strength stainless steel and has 24K gold-plated (24K AU) N female for maximum bandwidth, power transfer, and durability.
This product is made and tested one by one with highly skilled craftsmanship.
Guarantee one-year manufacturer warranty included. Patent Pending
The WideAnt2-Plus-5G™ product includes:
- WideAnt2-Plus-5G™ Antennas (selectable using the variant options above).
- Male-To-Female SMA Adapter: connecting direct signal to the SMA connectors on your modem router.
- Dual-To-Single Antenna mount: support 2 antennas on a single pole.
Additional purchase options:
- WRG400 Cable: to connect the Two-way combiner to your modem router.
- Two-way Combiner: for combining dual/quad connection from antennas to a single WRG400 cable.
- Antenna-To-Combiner Adapter: connecting N-type connectors on Antennas to the ones on Two-way Combiners.
- Lightning Protection Connectors
Note: The pole/mast shown in images above is for illustration and is not included in the product.
|Applications||Mainly recommended for:
|Network Support||5G/4G/3G networks (depending on your device) - support virtually all cellular carriers worldwide|
|MIMO Devices Support||
|Connector Support||SMA or TS9 connector (TS9 adapter is available for purchase from our store)|
|All-Weather Outdoor Protection||Yes|
|Operating Frequencies||450-6000 MHz, peak gain of 16 dBi*|
|Nominal Impedance||50/75 Ohm|
|Polarizations||±45 degree waves|
|Dimensions (aggregate)||20.2 x 9.2 x 21 inches (51.3 x 23.4 x 53.3 cm)|
|Weight (aggregate)||4.9 lbs (2.2 kg)|
*Gain in dBi values are averages increases obtained by comparing the standard/internal device antenna to a properly-installed WideAnt2-Plus-5G™ located substantially higher than your modem router location.
You can connect WirEng® antennas to your Peplink Pepwave MAX BR1 MK2 Router using the 'Cellular Main' and 'Cellular Diversity/ AUX' connectors (also known as SMA Cellular Antenna Connectors) available on the router. Please refer to your device manual to find the locations of these connectors.
The connection is made using the WRG400 cable and SMA Adapters (purchasable through our store).
WirEng® antennas support all variants and models of Peplink Pepwave MAX BR1 MK2 Router, for example:
Feel free to use the live chat or contact us if you have any question or need support.