UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
WirEng®

UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters

Regular price $259.99 Sale price $299.99
UniAnt75™ High Gain Omni Shielded Antenna for Boosters, Amplifiers, Repeaters
by WirEng®

The UniAnt75™ by WirEng® is most possibly the only fully shielded, ground-plane, cellular-bands omni antenna in the market today! The UniAnt75™ is made in the USA using state of the art wide band technology that incorporates a network of many smaller antennas inside its radome, with the added enhancement of a large ground plane to enhance its gain, performance, and shielding of the outside signal from the inside signal of Amplifiers, boosters, and repeaters. The UniAnt75™ has a toroidal-shaped radiation pattern so that no waves are wasted up into the sky or down into the ground. The UniAnt75™ can be used with a variety of radio equipment systems, including boosters, amplifiers, and repeaters (as the external antenna), and with many other applications in the 700MHz to 3800MHz range. The UniAnt75™ is fully enclosed and all-weather resistant, and is therefore also perfect for the marine environment. The connector type on the UniAnt75™ is N female. The UniAnt75™ is made in the USA with domestic and imported components and includes a one-year warranty period. Patent pending.

Main Features and Benefits
  • The UniAnt75™ is a very unique antenna, because it's omni-directional, shielded, and high gain! It's perfect for the marine environment, and also with boosters/amplifiers/repeaters when a directional antenna is not appropriate due to the different service provider tower locations.
  • The UniAnt75™ features ultra wide operational bandwidth thanks to its stacked-dipole design. Can be used with 75-ohm boosters/amplifiers/repeaters as the external antenna, with the added benefit of creating a dead-zone right beneath it, therefore greatly reducing inside-outside feedback/loopback/interference problems in booster/amplifier/repeater systems (this is the 75-ohm version for 75-ohm systems).
  • The UniAnt75™ can also be used with other RF devices operating in the 700MHz to 3800MHz range and requiring a nominal impedance of 75 Ohm.
  • The UniAnt75™ operating frequency range is 700-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 30°. The UniAnt75™ nominal impedance is 75 Ohm and the connector is F Female. This is the white version with 75 Ohm impedance (SKU UNI-75-OHM). The UniAnt75™ is mainly recommended for outdoors (pole) applications.
  • *Gain in dBi values are averages increases obtained by comparing the standard/internal device antenna to a properly-installed UniAnt75™ located substantially higher than the device location. The UniAnt75™ measures 12 x 26.5 x 12 inches and weighs 1.6 lbs. Made in the USA with skilled craftsmanship. One year manufacturer warranty included. Patent pending.

Share this Product


More from this collection