Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
Omnirial2 True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
WirEng®

Omnirial2™ True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni

Regular price $273.17 Sale price $287.49
Omnirial2™ True MIMO ±45° Antenna for Digi ConnectPort X4 Dual Omni
by WirEng®

The Omnirial2™ by WirEng® is a fully enclosed, all-weather, omnidirectional, true MIMO (+45° and -45° wave polarizations) antenna for outdoor/pole/mast installations. The Omnirial2™ can withstand harsh environments and is fully sealed and all-weather protected. This Omnirial2™ set is made for the Digi ConnectPort X4 and comes with 30 feet of dual ULL240 ultra-low loss coaxial cable with the correct connector/adapter for the Digi ConnectPort X4. This Omnirial2™ set are made one by one with highly skilled craftsmanship and include a one-year warranty period.

Main Features and Benefits
  • The Omnirial2™ is a true MIMO (±45° polarizations) dual antenna made to enhance your Digi ConnectPort X4 signal and SINR/CINR. For best results, simply install the Omnirial2™ on a standard TV antenna pole (1.25 inch diameter recommended) as high as possible, run the included cables to your Digi ConnectPort X4, and enjoy the better signal and faster throughput!
  • This Omnirial2™ system will connect directly to your Digi ConnectPort X4, supporting all its frequency bands and modes of operation. It is recommended even when your signal is not too low because its dual ±45° polarization antenna elements will increase the signal-to-noise (SINR/CINR) ratio for better download and upload data rates!
  • This Omnirial2™ system is specifically effective with the 4G signal, but will also work with 3G as long as your device allows it. This set, made for enhancing the Digi ConnectPort X4 signal strength and data throughput, includes the Omnirial2™ and 30 feet of dual ULL240 ultra-low loss coaxial cable for direct connection to the Digi ConnectPort X4.
  • The Omnirial2™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 65°. This Omnirial2™ system is made for the Digi ConnectPort X4 (SKU NA-DIG-CONNE-OMR2) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are averages increases obtained by comparing the standard/internal device antenna to a properly-installed Omnirial2™ located substantially higher than the Digi ConnectPort X4 location. The Omnirial2™ itself measures 3.1 x 15 x 8.5 inches and weighs 3.4 lbs. One year manufacturer warranty included.

Share this Product