Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
WirEng®

Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni

Regular price $331.60 Sale price $349.00
Omnirial2™ True MIMO ±45° Antenna for Microhard IPn4Gii-CAT12 Dual Omni
by WirEng®

The Omnirial2™ by WirEng® is a fully enclosed, all-weather, omnidirectional, true MIMO (+45° and -45° wave polarizations) antenna for outdoor/pole/mast installations. The Omnirial2™ can withstand harsh environments and is fully sealed and all-weather protected. This Omnirial2™ set is made for the Microhard IPn4Gii-CAT12 and comes with 30 feet of dual WRG400 ultra-low loss coaxial cable with the correct connector/adapter for the Microhard IPn4Gii-CAT12. This Omnirial2™ set are made one by one with highly skilled craftsmanship and include a one-year warranty period.

Main Features and Benefits
  • The Omnirial2™ is a true MIMO (±45° polarizations) dual antenna made to enhance your Microhard IPn4Gii-CAT12 signal and SINR/CINR. For best results, simply install the Omnirial2™ on a standard TV antenna pole (1.25 inch diameter recommended) as high as possible, run the included cables to your Microhard IPn4Gii-CAT12, and enjoy the better signal and faster throughput!
  • This Omnirial2™ system will connect directly to your Microhard IPn4Gii-CAT12, supporting all its frequency bands and modes of operation. It is recommended even when your signal is not too low because its dual ±45° polarization antenna elements will increase the signal-to-noise (SINR/CINR) ratio for better download and upload data rates!
  • This Omnirial2™ system is specifically effective with the 4G signal, but will also work with 3G as long as your device allows it. This set, made for enhancing the Microhard IPn4Gii-CAT12 signal strength and data throughput, includes the Omnirial2™ and 30 feet of dual WRG400 ultra-low loss coaxial cable for direct connection to the Microhard IPn4Gii-CAT12.
  • The Omnirial2™ operating frequency range is 690-3800 MHz with a peak gain of (varies) dBi*, a horizontal aperture of 360° and a vertical aperture of 65°. This Omnirial2™ system is made for the Microhard IPn4Gii-CAT12 (SKU MCH-IPn4Gii-CAT12-OMR2) and is mainly recommended for Outdoors (Pole) applications.
  • *Gain in dBi values are average increases obtained by comparing the standard/internal device antenna to a properly-installed Omnirial2™ located substantially higher than the Microhard IPn4Gii-CAT12 location. The Omnirial2™ itself measures 3.1 x 15 x 8.5 inches and weighs 3.4 lbs. One year manufacturer warranty included.

Share this Product