WideAnt2-X™ Fully Enclosed Dual Antenna for Modems Hotspots Routers True MIMO High-Gain Wide Band ±45° Polarizations

$179.88

WideAnt2-X™ Fully Enclosed Dual Antenna for Modems Hotspots Routers True MIMO High-Gain Wide Band ±45° Polarizations
by WirEng®

The WideAnt2-X™ by WirEng® is a true ±45° MIMO (45° clockwise and 45° counter-clockwise wave polarizations), fully enclosed, all-weather, ultra-linear, larger dual antenna for outdoor/pole/mast installations. The WideAnt2-X™ can be used with a variety of radio equipment systems, including MIMO modems, hotspots, and routers (as the external antenna) and with many other applications in the 700MHz to 5400MHz range. The WideAnt2-X™ is fully enclosed and all-weather resistant, and is ideal for MIMO devices because it captures and transmits waves in two different polarization modes, as per MIMO-devices specifications. The WideAnt2-X™ can also be used with other dual-antenna-port devices such as Aux/Diversity devices. The connectors on the WideAnt2-X™ are N female. Industrial-strength stainelss steel Single-to-Dual antenna pole mount adapter included. The WideAnt2-X™ is made in the USA with domestic and imported components and includes a one-year warranty period.

Main Features and Benefits
  • The WideAnt2-X™ is an elegant, larger, fully enclosed, powerful directional Dual antenna that truly captures and transmits both +45° and -45° waves independently, as per strict MIMO specifications (two cable runs required to connect to a MIMO device, not included).
  • The WideAnt2-X™ features standard N-Female connectors and includes an industrial-strength, stainless steel single-to-dual pole adapter so that you'll be able to install this set on a standard TV antenna pole (1.25 inches in diameter recommended).
  • The WideAnt2-X™ can be used with MIMO modems, hotspots, routers, and with M2M applications (device-specific adapters not included. Search for ExtAnt adapter and coaxial cables if you want to connect the WideAnt2-X™ directly to your device).
  • The WideAnt2-X™ operating frequency range is 700-5400 MHz with a peak gain of 2 x 16 dBi*, a horizontal aperture of 55° and a vertical aperture of 40°. The WideAnt2-X™ nominal impedance is 50 Ohm and the connectors are N Female. This is the white version with 50 Ohm impedance (SKU WDAX2-50-OHM). The WideAnt2-X™ is mainly recommended for outdoors (pole) applications.
  • *Gain in dBi values are averages increases obtained by comparing the standard/internal device antenna to a properly-installed WideAnt2-X™ located substantially higher than the device location. The WideAnt2-X™ measures 17.5 x 9.2 x 21 inches and weighs 5.7 lbs. Made in the USA with skilled craftsmanship. One year manufacturer warranty included.

Add to Cart:

  • Model: WDAX2-50-OHM
  • Shipping Weight: 10.6lbs
  • 25 Units in Stock
  • Manufactured by: WirEng®



This product was added to our catalog on Tuesday 30 May, 2017.

Your IP Address is: 54.196.69.175
Copyright © 2017 Best Cellular Distributor. Powered by Zen CartZen Cart templates