Easy-Install 7dBi Omnidirectional Quad-Band Antenna for the Apple iPhone 3GS
Includes the Direct-Connection* to Your Apple iPhone 3GS and Installs in Minutes!
Features
- Can be used anywhere, since it requires no power source!
- The antenna base (ground plane + magnet + cable) weights 1.2 lbs (540 grams)
- The stylus weights 1.6oz (45 grams)
- The set includes adhesive/velcro metallic mount
- The included low-loss coaxial cable measures approximately 12 feet (3.63 meters)
- The antenna's stylus measures 2.25 ft (0.69 meters)
- The base diameter measures 3.9 inch (10 centimeters)
- The connector on the antenna-side is FME female
- Includes the direct-connection* adapter cable for the Apple iPhone 3GS
- The antenna's cable type is RG58
- The frequency range is 800 to 1,023MHz and 1,650 to 2,200MHz
- The impedance is 50 Ohm
- The radiation type is omnidirectional
- The maximum VSWR is 2.5:1
- The polarization is vertical
- The maximum signal gain is 7dBi (4.5dBi at 800MHz, 5.5dBi at 900MHz, 4.5dBi at 1,700MHz, 5.5dBi at 1,800MHz, 7dBi at 1900MHz, and 4dBi at 2100MHz)
- Can withstand winds of up to 90 mph thanks to its powerful magnetic grip
- Usually ships within 1 to 2 business days from your order
- Made with top quality craftsmanship and RoHS-compliant components
- Comes with our 365 days worry-free warranty
Benefits
- Improves cellular coverage even in towns that are too small to have their own cellular tower
- Reduces or even eliminates disconnections and dropped calls or data sessions
- Protects you from harmful electromagnetic radiations (EM) by channeling the radio frequency output from the Apple iPhone 3GS to the antenna
- Can improve upload and download 3G and 2G rates because a better signal means less CRC errors
- Helps establish cellular signal coverage in basements, warehouses, tunnels, and subterranean locations
- Extends cellular coverage to remote areas that are very far from the nearest cellular tower, where the signal is barely measurable
- The price for this antenna and adapter set is just $59.85 (quantity discount available)!
Package Contents
- 7dBi antenna whip
- Magnetic antenna base with 12 feet of cable terminating in an FME female connector
- One-foot FME male to Apple iPhone 3GS proprietary connection* cable (see note below)
- Metallic, weather-resistant adhesive/velcro mount
- QuickStart guide with signal-strength measuring tips
or ...Purchase At Our Wholesale Price and Make A Profit Reselling This Top Quality Product
Our internal part number for this item is AC7DBHM-APP-IPHONE-3GS. *The correct adapter for your Apple iPhone 3GS will be included. If your phone has no antenna port, or if your phone antenna port was deemed unusable by our Engineering Team, we will include a velcro adapter along with the direct-connection adapter, at no extra charge. Notice that on some devices the antenna port is located beneath the battery door or beneath the back case, and you may have to disassemble your device and drill a hole for easier access to this port. In some very rare cases, a device antenna port may be located under the battery; if that is your case, we will also include a velcro adapter at no extra charge. By purchasing this product you agree to our Warranty and Terms and Conditions. Please visit these pages for details.
|
